Contaminated Insulating Oil Regeneration System, Transformer Oil Regeneration Plant ZYD-I-100(6000LPH)
Application:
Contaminated Insulating Oil Regeneration System, Transformer Oil Regeneration Plant ZYD-I-100(6000LPH) is special for purifying and recycling the used and old transformer oil, mutual oil, switch oil. It takes weather proof type for the system, which can protect the unit from raining weather, and dust proof. Also it can inject the insulating oil into the transformers on-line. regenerate the seriously deteriorated oil by removing the polarity materials.
Comparing with the normal vacuum oil purification system, beside removing particles and moisture from oil, this system takes oil regeneration system which can deal with the acidity matters from oil. This system can fully regenerate used and old transformer oil to be new and fresh qualified transformer oil.
Feature:
1. This machine is high effective and portable, which is very suit to operate on line. Also it can be used to dry the electric equipment and input the oil into the electric equipment under the vacuum state.
2.The machine adopts the double-infrared liquid automatic controller, sensitive automatic pressure protector and the high effective equipment for degas, so it is easy to operate.
3. High vacuum limiting vacuum less than 5pa, working vacuum less than 35pa.
4. High absorption speed, absorption speed power more than 333L/Sr.
5. Duplex 3D stereo-evaporation technology, eliminating the liquid water very effectively.
6. UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effect.
7. Distinctive removing impurities technology filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power.
8. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after treatment.
9. The oil of any grades can be treated on line at the working site.
10. The Automatic oil purifier model is installed with PLC (Programmable logical control system) which can control the equipment automatically to every stage of its process and ensure its process and ensure its safe operation on site and on line without human supervision.
11. Can be operated both on-line and off-line.
12. Equip with BZ oil regeneration device to clean out the acidity matters from oil, refresh oil to be new.
Advantage:
Besides Double-Stage High-Efficiency Vacuum Insulation Oil purifier's function of dewatering, degassing and eliminating impurities, this Dust Proof Type Vacuum Transformer Oil Regeneration Machine | Old Transformer Oil Recycling Plant ZYD-I-100(6000LPH) can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid- alkali water-solubility. This machine is specially applied to vacuum filling oil and drying for power transmission equipments that are over 110KV.
Our Transformer Oil Purification and Maintenance Machines can bring you:
→Purifying your transformer oil high efficiently
→Maintain your transformer oil always in good status
→Save your old transformer oil replacement cost
→Solve your waste transformer oil disposal problem
→Guarantee your transformers working normally with qualified oil property
→Protect your transformers and power equipment from oil pollution problems
→Reduce your maintenance time, energy and invest on transformers and power plant
→Create a safety and cleaning oil use environment for your transformers of power station
→Bring a green oil ideal to the world and save oil energy for all of our generations
Technical Parameters:
| Parameters | Unit | ZYD-I -30 | ZYD-I -50 | ZYD-I -80 | ZYD–I -100 | ZYD-I -150 | ZYD-I -200 | ZYD-I -250 | ZYD-I -300 |
| Flow Rate | L/hr | 1800 | 3000 | 4800 | 6000 | 9000 | 12000 | 15000 | 18000 |
| Working Vacuum | MPa | -0.08 TO -0.099 |
| Working Pressure | MPa | ≤ 0.3 |
| Temperature Control Range | ℃ | 20 TO 80 |
| Operation Temperature | ℃ | 40 ~ 70 |
| Power Supply | | 380V, 3 Phase, 50Hz (or as per requirements) |
| Working hours without Trouble | Hour | 4000 |
| Continuous Working Hours | Hour | 150 |
| Working Noise | Db(A) | 75 | 75 | 75 | 75 | 80 | 80 | 80 | 80 |
| Heating Power | KW | 16 | 30 | 38 | 45 | 60 | 75 | 90 | 120 |
| Total Power | KW | 22 | 37.5 | 42.5 | 52.5 | 71.4 | 86.5 | 102.5 | 135 |
| Inlet/Outlet | mm | φ25 | φ32 | φ38 | φ42 | φ50 | φ50 | φ60 | φ60 |
| Weight | Kg | 600 | 800 | 900 | 1050 | 1400 | 1950 | 2000 | 2200 |
| Overall | Length | mm | 1050 | 1100 | 1150 | 1200 | 1450 | 1400 | 1800 | 1900 |
| Width | mm | 750 | 800 | 900 | 950 | 950 | 1100 | 1200 | 1200 |
| Height | mm | 1350 | 1400 | 1450 | 1500 | 1650 | 2150 | 1900 | 1900 |
Oil Data after Treatment:
| Breakdown Voltage (Dielectric) | ≥75~85 KV |
| Gas Content | ≤0.01% |
| Impurities Degree (Filtration precision) | ≤1-5 micron (no free carbon) |
| Moisture (water content) | ≤ 3 PPM |
| Dielectric Loss Factors | tgδ (90 C) % ≤0.001 |
| Cleanliness | ≤NAS 1638 Grade 5 |
►We are the leading manufacture near 20 years experience and supply best quality and highest cost performance oil purification machines. Our oil purifier equipment are built by high quality raw materials with newest advanced technology by many skilled technicians and professional workers. We are honest to every customer and responsible for every machine we sold, we offer great after sales service, anytime when customer need us, no matter before or after purchase, we are available online or calling, to make a fast and instant response to customer.
►we practiced in this industry during all these years, and have rich on-site experiences too. Any on-site cases, please contact us for a solution.
►For detailed product specifications, please leave us your email or mobile no. To send you the catalog. Thank you.
Product Tags:
|
|
Contaminated Transformer Oil Regeneration Machine 6000LPH High Absorption Speed Images
|
